If you own or are buying a 100-year-old home in London, St. Thomas or Woodstock, the condition of four systems (electrical, plumbing, heating and roof) may shape which insurers are open to the risk and on what terms.

Older homes often come with solid construction, mature neighbourhoods and real character. They can also have original or aging systems that insurers may ask about before offering coverage, and updates may change the options on the table.
The examples in this post are for illustration purposes only. Each homeowner’s situation is unique, and how a particular insurer responds depends on its underwriting rules, the policy wording and the facts involved. Your own broker and your own policy documents are the right places to confirm anything specific to you.
In this guide11 sections
- Why Age Alone Is Not the Whole Story
- Electrical: Old Wiring, Panels and 60-Amp Service
- Plumbing: Galvanized, Lead and Other Older Pipe Materials
- Heating: Furnaces, Boilers and Fuel Type
- Roof: Age, Materials and Condition
- How Updates May Change Your Options
- Replacement Cost for Heritage and Century Homes
- What to Gather Before You Shop or Renew
- Frequently Asked Questions
- The Bottom Line
- Related Reading
Why Age Alone Is Not the Whole Story
A home’s age may matter less to an insurer than what is behind the walls, and how recently the major systems were updated.
Insurance Bureau of Canada (IBC) notes that older buildings have more issues, such as outdated wiring or plumbing, and that homes with a formal heritage designation may be subject to more rules regarding renovations and repairs. Its guidance on how home insurance rates are set also says insurers will ask about things like knob-and-tube or aluminum wiring, and that galvanized steel or lead pipes are more likely to crack and leak.
In practice, two homes built in the same decade could be viewed differently. One may have a modern panel, copper plumbing, a newer furnace and a recent roof, and another may still have original systems. Underwriting rules differ by insurer, so the same house could receive different responses from different companies.
For illustration only: Two brick homes built around 1915 sit a few blocks apart in Old East London. One has had its wiring, plumbing and furnace replaced over the past 15 years and has receipts to show it. The other has original wiring and an older furnace. An insurer may ask very different questions about each.
Next step: Before you ask for a quote, write down the approximate year each of the four systems was installed or last replaced, and gather any receipts, permits or inspection records.
Electrical: Old Wiring, Panels and 60-Amp Service
Wiring type and electrical capacity are often among the first things an insurer asks about in an older home.
Electrical Safety Authority (ESA) information explains that knob-and-tube wiring was used in homes from the early 1900s to the 1940s and is no longer used. ESA states it is safe provided it is properly maintained by a Licensed Electrical Contractor, and also notes that many insurers may decline to provide or renew coverage on homes with this type of wiring. ESA suggests having a Licensed Electrical Contractor assess the system.
IBC’s guide to knowing your home’s history adds that some carriers may require an updated ESA certificate to maintain coverage on knob-and-tube wiring, and that homes with 60-amp service may be ineligible for certain coverage or face surcharges unless upgraded. IBC also describes 60-amp service as insufficient for modern homes. A 60-amp service is a small electrical supply by today’s standards, and it may be a sign that the panel, the service entrance or the wiring behind it have not been modernized.
Other items an insurer may ask about include:
- Panel type. Older fuse panels may prompt questions, and a modern breaker panel could be viewed more favourably.
- Aluminum branch wiring. IBC links aluminum wire to homes from roughly the 1960s to the 1990s, and insurers may ask about it. IBC says aluminum wire can heat up and become a fire hazard.
- Evidence of work. An ESA Certificate of Acceptance (the document ESA issues when notified electrical work passes review) could help show that updates were reported and inspected.
ESA states that if you hire someone to do electrical work in your home, by law it must be a Licensed Electrical Contractor, and that homeowners who do their own work are required to file a notification of work. Whether a particular panel or wiring update is needed for coverage is a question for your insurer and your electrician, since requirements vary.
For illustration only: A buyer in Woodstock learns that a 1920s home has a 60-amp fuse panel and some original wiring. Before waiving conditions, they ask their broker what documentation an insurer may want and ask a Licensed Electrical Contractor for an assessment and a quote.
Next step: If you own or are buying a home with older wiring or 60-amp service, ask your broker what an insurer may require, then ask a Licensed Electrical Contractor for an assessment so you have written information to share.
Plumbing: Galvanized, Lead and Other Older Pipe Materials
Older supply and drain materials may be associated with a higher chance of leaks, and water damage is a common concern for insurers.
IBC says lead pipes are more likely to leak and crack, causing water damage, and its rate-setting guidance notes that upgrading to copper or plastic plumbing can help. Insurers may ask what the supply lines are made of, when the plumbing was last replaced and whether any section has been repaired or relined. Some homes have a mix, for example original galvanized pipe in one part of the house and newer copper in another.
Plumbing is also tied to how a policy may respond to water losses, which can depend on the cause, the wording and any endorsements. A gradual leak, a sudden burst and a sewer backup may be treated differently. This post does not go into polybutylene piping or other specific materials, which have their own considerations.
For illustration only: A St. Thomas homeowner has copper supply lines installed in the 1990s but original cast iron drains in the basement. They tell their broker about both, and ask whether a camera inspection of the drains and a review of sewer backup coverage could be worthwhile.
Next step: Ask a licensed plumber to identify the pipe materials and note their condition, and share that summary with your broker, along with any renewal or water-damage questions.
Heating: Furnaces, Boilers and Fuel Type
The type, age and fuel of your heating system may affect how an insurer views the home, and the work on it is regulated.
Heating questions for an older home can include the fuel (natural gas, electricity, heating oil, wood), the age of the furnace or boiler, and whether the system has been serviced. Wood stoves and older fireplaces may prompt separate questions. IBC’s heritage property guidance lists heating system modernization among the protective improvements that may reduce risk.
The Technical Standards and Safety Authority (TSSA) states that registered fuels contractors are the only businesses legally authorized to do fuels related work in Ontario, and its registry lets you verify a company’s registration. Keeping servicing records and invoices from a registered contractor may help if an insurer asks about the system. Oil tanks have their own considerations, and this post does not cover them.
For illustration only: A Kitchener homeowner replaces a 30-year-old furnace in a 1910 home. They keep the invoice, confirm the installer’s registration in the TSSA registry and send the details to their broker.
Next step: Note the age, fuel type and last service date of your heating system, check your contractor’s registration on the TSSA registry before work starts, and send your broker the details after any replacement.
Roof: Age, Materials and Condition
Insurers often ask about roof age and condition, and an older roof could be treated differently from a recently replaced one.
IBC’s rate-setting guidance says insurers generally prefer that roofs are updated within 20 years. Century homes may have older roof structures, slate or cedar shingles, steep pitches or multiple rooflines, and some of these materials may be harder to source or more costly to repair. IBC’s article on older homes also notes that in pre-war homes, poor insulation can cause outside moisture to accumulate, leading to rot, and that melting snow on roofs can create ice dams that may lead to water damage.
An insurer may ask when the roof was last replaced, what it is made of and whether there are any known leaks. Terms on roof coverage may differ by roof age, so review your policy documents.
Next step: Find out the age and material of your roof, ask your broker how roof age may affect your coverage, and keep receipts and photos from any replacement.
How Updates May Change Your Options
Replacing or updating a major system may widen your choices, though an update may not lead to a particular outcome.
IBC’s heritage guidance says to reduce risk through improvements such as updated wiring, plumbing, heating and roofing. Updates may help in several ways. Some insurers that are hesitant about original systems could be more open once they are replaced, and the home may qualify for different terms or a wider range of insurers.
A few cautions apply:
- Cost versus benefit. A major update is a significant expense, and insurance may be only one of several reasons to do it. Your safety, comfort and the home’s condition matter too.
- Insurer rules differ. One insurer may ask for a full rewire while another may accept a partial update with an inspection. Your broker can ask on your behalf before you commit to a project.
- Documentation matters. Permits, ESA certificates, invoices and photos could help show what was done and when.
- Timing. If you are buying, ask your broker about insurability early, since it could affect your conditions.
IBC’s guidance also encourages full disclosure, since sharing all pertinent information with insurers may help avoid coverage cancellation or claim denial.
Next step: Before you hire a contractor for a major update, ask your broker what documents an insurer could want once the work is complete, and request written confirmation from the trades about what was installed.
Replacement Cost for Heritage and Century Homes
Rebuilding a century home with similar quality and craftsmanship could cost more than a standard rebuild, so the building limit may deserve extra attention.
IBC says the amount required for your building should correspond to what it would cost to replace it if completely destroyed. For heritage properties, IBC notes that insurers must account for specialty contractors, rare materials and extended planning timelines. Plaster walls, wood trim, brick masonry, stained glass or custom millwork may cost more to rebuild than modern finishes, and a heritage designation may add municipal requirements. The rebuild figure is a different number from what the home might sell for.
IBC also says to expect your insurer to re-evaluate your property every few years, more often than for a newer building, as construction costs change. IBC suggests including photos and your municipality’s bylaws on renovations and repairs for heritage homes when applying. Ask your broker how your policy handles matching materials, building code upgrades after a loss and any heritage designation, since wording varies.
For illustration only: A London homeowner with a designated heritage home asks their broker how the building limit was set. They share photos of the original plaster, trim and woodwork, and ask whether the insurer’s estimate reflects those finishes.
Next step: Ask your broker how your building limit was calculated, whether it reflects the finishes in your home, and how your policy may respond to code upgrades or heritage requirements after a loss.
What to Gather Before You Shop or Renew
A clear package of information about your home may help your broker present it accurately and compare options.
- System summary. Year and type of wiring, panel and amperage, plumbing materials, heating type and age, and roof age and material.
- Documents. Receipts, permits, ESA Certificates of Acceptance, inspection reports and contractor invoices.
- Photos. Exterior, panel, furnace, plumbing and distinctive interior finishes.
- Heritage details. Any designation, along with local bylaws on renovations.
Where a home is difficult to place with a typical insurer, some brokers may have access to other options, and availability and terms can vary. Posts on knob-and-tube wiring, aluminum wiring, polybutylene plumbing, oil tanks, rural properties and high-risk homes cover those specific situations in more depth.
Next step: Put the documents and photos into one folder, share it with your broker and ask which gaps could matter most to an insurer.
Frequently Asked Questions
Can I get home insurance for an old home in Ontario?
Many older homes can be insured, but availability and terms may vary by insurer and by the condition of the systems. Your broker can ask what an insurer may need for your specific home.
Does a 60-amp service affect home insurance?
It could. IBC says homes with 60-amp service may be ineligible for certain coverage or face surcharges unless upgraded. Requirements differ by insurer, so ask your broker before deciding on an upgrade.
Do I have to rewire my century home to get insured?
Not necessarily. ESA says knob-and-tube wiring is safe when properly maintained by a Licensed Electrical Contractor, though many insurers may decline or not renew coverage on it, and some may accept an updated ESA certificate. What an insurer asks for can vary.
Will updating my plumbing, heating or roof lower my premium?
It may improve your options, though a particular price is not assured. Insurers weigh many factors, so ask your broker how your updates could be viewed.
Is it more expensive to insure a heritage home?
It could be, because rebuilding with specialty trades and materials may cost more and some insurers may rate these homes differently. Your broker can explain how your building limit and premium were set.
The Bottom Line
Insurers may ask about four systems in an older home: electrical, plumbing, heating and roof. Updates could widen your options, and a century home’s rebuild cost may be higher than you expect. Requirements, availability and pricing vary by insurer, and every homeowner’s situation is unique. The best time to ask is before you buy, renew or commit to a major project.
Related Reading
These posts in the series may help with the next question.
- Home Insurance in Ontario: The Complete Guide for Homeowners
- Knob-and-Tube Wiring and Home Insurance in Ontario: Your Options
- Declined for Home Insurance? High-Risk Options in Ontario
- Rural Home Insurance in Ontario: Fire Halls, Hydrants, Wells and Septic
- Oil Heating and Your Home Insurance: What Ontario Homeowners Should Know About Tanks
→ Get a home insurance quote and talk through your older home with a licensed broker.
Questions? Call or text Matt Santagapita at 226-777-2403 or email [email protected].
This content is for informational purposes only and does not constitute financial, legal, or insurance advice. Examples are for illustration purposes only, and every homeowner’s situation is unique. Coverage availability, terms, and pricing vary by insurer and individual circumstances. Contact a licensed insurance broker to discuss your specific needs. Matt Santagapita is a RIBO-licensed broker at Merit Group Insurance Brokers in London, Ontario.

