If your London-area home was built between the mid-1960s and the late 1970s, aluminum wiring could be behind the questions an insurer asks, and a licensed electrician’s assessment may be the best place to start.
Aluminum wiring is not a reason to panic, but it may affect whether a policy is offered, on what terms and what paperwork a broker may request. A clear picture of what is in your walls could make the conversation simpler.
The examples in this post are for illustration purposes only. Each homeowner’s situation is unique, and how a particular insurer responds depends on its underwriting rules, the policy wording and the facts involved. Your own broker and your own policy documents are the right places to confirm anything specific to you.
What Aluminum Wiring Is and Why Insurers Ask About It
Aluminum wiring was installed in some Ontario homes during a limited period, and insurers may ask about it because of how its connections could behave over time.
The Electrical Safety Authority (ESA) says that homes built between the mid-1960s and late 1970s may contain aluminum wiring. ESA’s flash notice on the topic explains that reported problems with aluminum wiring have been related to the overheating and failure of aluminum wiring terminations, meaning the points where the wire connects to switches, outlets and fixtures. The Insurance Bureau of Canada (IBC) notes that aluminum can expand and contract more than copper, which can result in loose connections, and that aluminum wire can heat up and become a fire hazard.
ESA also makes a point worth keeping in view: it states that aluminum wiring is safe if proper connections and terminations are made in line with the Ontario Electrical Safety Code and manufacturer specifications. The concern is mainly about how the wire is connected, and that is why remediation tends to focus on the connections.
Because overheating connections are a fire concern, an insurer may want to understand older wiring before offering coverage. That could mean a question on the application, a request for an inspection or a condition attached to the policy.
For illustration only: A couple in Woodstock is buying a 1974 bungalow. The listing does not mention the wiring, so they ask their broker and the home inspector to check what type of wiring is in the house before they finalize their insurance application.
Next step: Find out what wiring your home has. Check your inspection report, ask the seller or previous owner, and consider a licensed electrical contractor’s assessment if the home falls within the mid-1960s to late-1970s window.
How Aluminum Wiring May Affect Availability
Some insurers may decline to offer coverage, some may offer it with conditions, and some may treat it as one factor among many, so availability could vary quite a bit.
ESA states that some insurers require an ESA inspection before providing coverage and that homeowners may need to provide the insurer with a copy of the ESA Certificate of Acceptance. IBC likewise notes that insurance companies may require an ESA certificate confirming that electrical work meets code standards in order to maintain coverage. ESA’s flash notice adds that some insurers may require complete replacement with copper wiring, and recommends that homeowners verify their own insurer’s requirements.
In practice, what an insurer may ask for can depend on factors such as:
- Whether the wiring has already been assessed or repaired, and by whom.
- Whether an ESA certificate exists, and how recent it is.
- The age and overall condition of the home, including the panel and other systems.
- Whether the aluminum wiring is throughout the house or limited to certain circuits.
- The insurer’s own appetite for older homes at the time you apply.
If standard markets are not available for a home, a broker may look at other options. Those could include specialty or higher-risk markets, which may cost more or carry different terms. Availability and pricing can change over time, so a decline from one insurer may not be the last word.
Next step: Ask your broker, before you apply or renew, what documentation different insurers may want for aluminum wiring, so you can gather it in one pass.
Typical Requirements an Insurer May Ask For
Requests tend to cluster around proof that a qualified person has assessed the wiring and that the connections have been made safe.
Common requests, which vary by insurer, could include:
- A disclosure on the application. You may be asked whether the home has aluminum wiring, knob and tube wiring or both. Answer accurately and completely, since the information you give may be relied on when the policy is issued.
- A report from a licensed electrical contractor. ESA advises hiring a Licensed Electrical Contractor (LEC) experienced with aluminum wiring to assess the system, make repairs, obtain an ESA inspection and provide a Certificate of Acceptance. IBC also recommends a licensed electrical contractor to evaluate the condition of the wiring and arrange for official inspection.
- An ESA Certificate of Acceptance. This is the document ESA refers to when it says homeowners may need to give their insurer a copy.
- A timeline. Some insurers may agree to coverage on the condition that remediation is completed within a set period. Whether this is offered can depend on the insurer and the home.
For illustration only: A homeowner in St. Thomas receives a renewal notice asking for confirmation of the wiring type. She asks her broker what the insurer needs, hires a licensed electrical contractor for an assessment and sends the resulting paperwork to her broker before the renewal date.
Next step: When an insurer or broker asks for wiring documentation, ask for the request in writing so you and your electrician know exactly what is needed.
Pigtailing and Other Remediation Approaches
ESA’s guidance describes two approaches: devices marked for use with aluminum, or copper pigtails at the connections, and the right choice for a given home is a decision for a licensed electrician.
Pigtailing means connecting a short length of copper wire between the aluminum conductor and the terminal of a device. ESA’s flash notice describes the two permitted approaches this way:
- Devices marked for aluminum. Terminations of aluminum conductors are made to devices that are marked as suitable for aluminum conductors.
- Copper pigtails. A copper wire pigtail is connected between the aluminum conductor and the connection screw of a device approved only for copper.
The same notice says that inspectors should look at termination points for signs of failure and overheating, and that damaged sections may need to be cut back before repairs are made. It also notes that the Ontario Electrical Safety Code permits aluminum wiring when adequate precautions are taken at terminations and splices, and that push-in terminations are prohibited. This post does not go further into technical detail, since the specifics of a repair depend on the home and the code in force at the time.
Replacing aluminum wiring with copper is a more extensive option and may involve opening walls and ceilings. Cost and disruption could vary widely depending on the size and layout of the house. ESA’s materials do not say which approach an insurer may accept, and insurers may differ, so it is worth asking before you commit to a plan.
Next step: Ask a licensed electrical contractor to explain in writing which approach they recommend for your home and why, and ask your broker whether the insurers you may use accept that approach.
Hiring a Licensed Electrician and Getting an ESA Inspection
A licensed electrical contractor can assess the wiring, carry out repairs and arrange the ESA inspection that leads to a Certificate of Acceptance.
ESA advises homeowners to hire a Licensed Electrical Contractor who is knowledgeable in the special techniques required for working with and repairing aluminum wiring. Ontario.ca’s guidance on your rights when starting home renovations or repairs adds that a person cannot operate an electrical contracting business without an electrical contractor licence from ESA, and that credentials can be checked in the ESA database.
Some questions worth asking before you hire:
- Is the contractor licensed by ESA, and can you verify it in the ESA database?
- Do they have experience with aluminum wiring specifically?
- Do they obtain the permit and inspection, and provide the Certificate of Acceptance?
- What is covered by their warranty, and do they carry liability insurance?
- Can they give you a written scope, price and timeline?
Electrical work by an unlicensed person could raise questions with the inspection authority and with an insurer, and a do-it-yourself fix is not a substitute for a certificate. If you are unsure about a step, a licensed electrician is the right person to ask.
Next step: Get at least two written quotes from licensed electrical contractors, verify each licence with ESA and keep all permits, certificates and invoices with your insurance records.
Pricing and Policy Terms With Aluminum Wiring
Aluminum wiring may influence the premium, the deductible or the policy terms, but the effect can vary by insurer and by home.
Some insurers may price a home with unremediated aluminum wiring higher than a similar home with updated wiring, or may include conditions. Others may not treat it as a major factor if an ESA certificate is in place. Because rating factors are set by each insurer, it is difficult to say what any one home could cost. A comparison of quotes, done with the same wiring details disclosed each time, may give a more reliable picture.
It may also be worth asking whether any fire coverage limits, special deductibles or exclusions apply to electrical issues on a particular policy, and how the policy treats a loss that is linked to a known condition that was not disclosed.
Next step: When you request quotes, give each insurer the same wiring information, and ask your broker to point out any difference in conditions, deductibles or exclusions between them.
Buying or Selling a Home With Aluminum Wiring
Wiring questions are best raised early in a purchase, because insurance conditions could affect your timeline and negotiating position.
If you are buying, consider asking your broker for an indication of insurability while conditions are still in the offer, and ask your inspector to identify the wiring type. If you are selling, an ESA certificate and invoices for completed work may help buyers and their insurers. Buyers in some price ranges or neighbourhoods in London, Kitchener-Waterloo or Windsor may find older homes more common, so the question could come up more than expected.
For illustration only: A buyer in a Windsor neighbourhood of 1970s homes asks his broker whether insurance may be available before his conditional period ends. His broker explains which documents different insurers may want, and he asks the seller whether any electrical work has been done and whether a certificate exists.
Next step: If you are buying a home built from the mid-1960s to the late 1970s, ask your broker about wiring and insurability before your conditions expire.
What to Do If You Already Have a Policy
If you already have a policy and later learn the home has aluminum wiring, consider telling your broker, since the policy was likely based on the information you provided.
IBC’s Code of Consumer Rights and Responsibilities says you should promptly inform your insurance company, broker or agent of any change in your circumstances. Learning something new about your home is not the same as changing it, but raising it early could give your broker time to find out what documentation may be needed and avoid a surprise at renewal. How an insurer responds can depend on the wording and the facts.
Warning signs that may deserve prompt attention from a licensed electrician include warm or discolored switch and outlet cover plates, flickering lights, a burning smell, or outlets and switches that do not work. If you notice any of these, consider switching off the circuit and contacting a licensed electrical contractor promptly, and call emergency services if you see smoke or flames.
Next step: Tell your broker what you have found, ask whether your insurer needs documentation, and book a licensed electrician if you notice any of the warning signs above.
Basic Habits That May Reduce Electrical Risk
While you work through remediation, a few habits may help lower the chance of an electrical problem.
- Avoid overloading outlets and power bars, and do not run extension cords through walls or under rugs.
- Test smoke alarms monthly and replace them according to the manufacturer’s guidance.
- Have a licensed electrician check connections before adding major appliances or new circuits.
- Keep records of each electrical repair, including dates, invoices and certificates.
Next step: Put smoke alarm testing and an annual review of your electrical records on your calendar, and share completed work with your broker.
Frequently Asked Questions
Can I get home insurance with aluminum wiring in Ontario?
It may be possible, but it can depend on the insurer. ESA states that some insurers require an ESA inspection before providing coverage, and IBC notes insurers may require an ESA certificate. Your broker can tell you what different insurers may want.
Is pigtailing aluminum wiring acceptable to insurers?
ESA’s flash notice describes copper pigtails as one permitted approach, alongside devices marked for aluminum. Whether a particular insurer accepts it can vary, so ask your broker before work begins.
Do I have to replace all the aluminum wiring with copper?
Not necessarily as a matter of code, since ESA says the Ontario Electrical Safety Code permits aluminum wiring with proper precautions. However, ESA’s notice says some insurers may require complete replacement, so confirm the insurer’s requirement.
What is an ESA Certificate of Acceptance?
It is the document ESA refers to as evidence that electrical work has been inspected. ESA says homeowners may need to give their insurer a copy. A licensed electrical contractor can explain how to obtain one.
Should I tell my insurer if I find aluminum wiring after I buy?
Many homeowners choose to tell their broker promptly, since the policy was based on the information provided. Your broker can explain how your insurer may view it.
The Bottom Line
Aluminum wiring may affect whether and on what terms a home can be insured, but ESA states it is safe when properly connected, and a licensed electrician can assess and repair it. Insurers may ask for an ESA inspection, a Certificate of Acceptance or, in some cases, full replacement. Requirements vary by insurer, and every homeowner’s situation is unique. Finding out what you have, and talking to your broker early, could save time and stress later.
Related Reading
These posts in the series may help with the next question.
- Home Insurance in Ontario: The Complete Guide for Homeowners
- Knob-and-Tube Wiring and Home Insurance in Ontario: Your Options
- Declined for Home Insurance? High-Risk Options in Ontario
- Poly-B Plumbing and Home Insurance: What Buyers and Owners Need to Know
- Oil Heating and Your Home Insurance: What Ontario Homeowners Should Know About Tanks
→ Get a home insurance quote and talk through your wiring questions with a licensed broker.
Questions about your home insurance? Contact Matt Santagapita at Merit Group Insurance Brokers | [email protected] | 519-657-5500.
This content is for informational purposes only and does not constitute financial, legal, or insurance advice. Examples are for illustration purposes only, and every homeowner’s situation is unique. Coverage availability, terms, and pricing vary by insurer and individual circumstances. Contact a licensed insurance broker to discuss your specific needs. Matt Santagapita is a RIBO-licensed broker at Merit Group Insurance Brokers in London, Ontario.

